Supply current: Working current: 50mA (typical) Peak current: 80mA
Fingerprint image input time: less than 0.3s
Window area: 14x18 mm
Matching method: Comparison method (1: 1)
Search method (1: N)
Characteristic file: 256 bytes
Template file: 512 bytes
Storage capacity: 1000 pieces
Security Level: Five (from low to high: 1,2,3,4,5)
Fake rate (FAR): less than 0.001%
Refusal rate (FRR): less than 1.0%
Search time: less than 1.0 seconds (1: 1000 hours, mean value)
Host interface: UART \ USB1.1
Communication baud rate (UART): (9600xN) bps Where N = 1 ~ 12 (default N = 6, ie 57600bps)
Working environment: Temperature: -20°C - +40°C Relative humidity: 40% RH-85% RH (no condensation)
Storage environment: Temperature: -40°C - +85°C Relative humidity: less than 85% H (no condensation)
Integrated image collecting and algorithm chip together, ALL-in-One
The fingerprint reader can conduct secondary development, can be embedded into a variety of end products
Low power consumption, low cost, small size, excellent performance
Professional optical technology, precise module manufacturing techniques
Good image processing capabilities can successfully capture an image up to resolution 500 dpi
Suitable for fingerprint lock, fingerprint safes, and other purposes.
1 x R307 Optical Fingerprint Reader Sensor Module
1 x Connecting Cable (6-pin)
Note: The product is tested before shipping. We do not provide help related to programming.
There is no warranty on the module. These can easily get damaged with wrong polarity or high voltage given to it. So be careful before power on. Internal LED does not come or stay on all the time, It only comes on when you give command to read fingerprint.
R307 Fingerprint Module consists of an optical fingerprint sensor, high-speed DSP processor, high-performance fingerprint alignment algorithm, high-capacity FLASH chips, and other hardware and software composition, stable performance, simple structure, with fingerprint entry, image processing, fingerprint matching, search and template storage and other functions.
R307 fingerprint module is fingerprint sensor with TTL UART interface for direct connections to microcontroller UART or to PC through MAX232 / USB-Serial adapter. The user can store the fingerprint data in the module and can configure it in 1:1 or 1: N mode for identifying the person. The FP module can directly interface with 3.3 or 5v Microcontroller. A level converter (like MAX232) is required for interfacing with PC serial port.
Integrated image collecting and algorithm chip together, ALL-in-One Fingerprint reader can conduct secondary development, can be embedded into a variety of end products. Users can conduct secondary development, can be embedded into a variety of end products, such as access control, attendance, safety deposit box, car door locks
Low power consumption, low cost, small size, excellent performance, Professional optical technology, precise module manufacturing technics. Good image processing capabilities can successfully capture an image up to resolution 500 dpi Finger detection function.